 |
 3630 Automated X-Press
This unique programmable laboratory press performs the entire pressing cycle with the push
of a single button.
The 3630 X-Press is a 35-ton programmable hydraulic press intended for the repetitive
pressing of sample pellets for spectroscopy. Automation greatly improves sample
uniformity and frees the technician for other tasks, as this press will operate unattended.
In automatic mode, this press performs a complete pressing cycle. On starting, it goes to
a selected pressure, maintains the pressure for a set time, and drops the pressure to zero
over a programmed interval. On completion of the cycle, the press returns the platen
back to the base position and makes an audible signal indicating it is ready for the next
sample.
The 3630 accepts all SPEX SamplePrep pellet dies and can also be operated manually as
a simple motorized press whose functions are under direct user control.
Safety features include a transparent polycarbonate door with system interlock,
and a pump cutoff in case of system or operator error.
- Unique programmable laboratory press.
- 35-ton hydraulic press for repetitive pressing of sample pellets.
- Automation improves sample uniformity, consistency and throughput.
- Program allows the technician to enter final pressure desired, time to hold at the
final pressure, and interval to return back to zero pressure.
- Typical pressing cycle is less than two minutes.
- Accepts all SPEX SamplePrep die sets.
- A safety interlock and automatic pump shut-off safety valve ensure safe operation.
- A European CEE 7/7 two-prong plug is supplied with each 3630-230 system.
|
| Specifications |
| Dimensions: | 23 in. (58 cm) x 11 in. (28 cm) x 32 ½ in. (82 cm) |
| Weight: | 121 lbs. net (55 kg); 190 lbs. gross (87 kg) |
| Motor: | 1/3 horsepower |
| Voltage: | 115 V/60 Hz |
| Force: | 10-35 tons ram pressure (20,000 - 70,000 Ibs.) |
| Platen Movement: | 1.0 inch (2.5 cm) |
| Platen Size: | 3.25 inches diameter (8 cm) |
| Daylight: | Adjustable 2.0 to 6.0 inches (5 to 15 cm) |
| Upper Screw Adjustment: | 3.5 inches (9 cm) |
  3630-230 Automated X-Press
For 230 V/50 Hz operation. A European CEE 7/7 two-prong plug is supplied with the 8000D-230 systems. A European CEE 7/7 two-prong plus is supplied with each 3630-230 system. |
| Specifications |
| Dimensions: | 23 in. (58 cm) x 11 in. (28 cm) x 32 ½ in. (82 cm) |
| Weight: | 121 lbs. net (55 kg); 190 lbs. gross (87 kg) |
| Motor: | 1/3 horsepower |
| Voltage: | 230 V/50 Hz |
| Force: | 10-35 tons ram pressure (20,000 - 70,000 Ibs.) |
| Platen Movement: | 1.0 inch (2.5 cm) |
| Platen Size: | 3.25 inches diameter (8 cm) |
| Daylight: | Adjustable 2.0 to 6.0 inches (5 to 15 cm) |
| Upper Screw Adjustment: | 3.5 inches (9 cm) |
3628 Bench-Press®
• Air-actuated, manually controlled laboratory press.
• 25-Ton maximum pressure is ideal for pressing sample pellets for XRF, IR, and other analytical methods.
• Compact design ideally suited for laboratory bench-top applications.
• Patented air-actuation system combines ease of use of a motorized press with the simplicity of a manual press.
• Single push-button operation.
• Pressure is measured with a dial and the pressure control valve can be set to produce repetitive, reproducible pressures.
• Neither hand-pumping nor electrical hook-up is required.
• Can be operated off an air compressor or a tank of compressed air.
|
| Specifications |
| Dimensions: | 1 in. (28 cm) x 21 in. (53 cm) x 28 in. (71 cm) |
| Weight: | 120 lbs. net (55 kg) 205 lbs. gross (93 kg) |
| Platen Movement: | 1 ¾ in. (4.4 cm) |
| Platen Size: | 5 ½ in. diameter (14 cm) |
| Daylight: | Adjustable 1 ¼ to 5 ¾ inches (3.2 to 14.6 cm) |
3621 SPEX SamplePrep-Carver 12-Ton Press
12-ton manual hydraulic press with buffer plate accepts all SPEX SamplePrep pellet dies.
Rugged and reliable presses noted for their extraordinary durability.
Equipped with safety cabinet/shield.
Both the Mini-C and Model C have a capacity of 12-tons.
Coupled with the SPEX SamplePrep 3613 die set, the Model C and Mini-C are ideally suited for IR labs.
The Model M has a 25-ton capacity for IR and XRF applications. |
| Specifications |
| Dimensions: | 20 ¼ in. (51 cm) x 10 ¼ in. (26 cm) x 8 in. (20 cm) |
| Weight: | 115 Ibs. net (52 kg) |
| Force: | 0-12 tons (0-24,000 Ibs.) |
| Platen Movement: | 5 1/8 in. (13 cm) |
| Platen Size: | 4 in. round (10 cm) |
| Daylight: | 5 ¾ inches (14.6 cm) |
| Upper Screw Adjustment: | |
SPEX SamplePrep dies are designed to fit all SPEX SamplePrep presses, and they are equally compatible with other standard laboratory presses using stand-alone dies.
3613 13mm Die Set
Used to form KBr discs for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disc extraction. Load limit 10 tons; weight 2.2 lbs (1 kg). |
3623 31 mm Die Set
To form 31 mm (11/4 in.) standard sample discs for XRF. Set includes evacuable die body, base, plunger, two polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disc extraction. Load limit 50 tons; weight 6.6 lbs (3 kg). Compatible with SPEX SamplePrep 3619 and 3619A Spec-Caps. |
3616 35 mm Die Set
To form 35 mm sample discs. Set includes evacuable die body, base, plunger, two 35 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disc extraction. Load limit 50 tons; weight 8.8 lbs (4 kg). Compatible with SPEX SamplePrep 3615 (33 mm) Spec-Caps. |
3614 40 mm Die Set
To form 40 mm sample discs. Set includes evacuable die body, base, plunger, two 40 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disc extraction. Load limit 50 tons; weight 10 lbs (4.5 kg). Compatible with SPEX SamplePrep 3617 (38 mm) Spec-Caps. |
3623W 31 mm Die Sleeve-and-Plunger Set
Used with 3623, 31 mm Evacuable Pellet die and PrepAid Sample Binder. Forms stable XRF sample discs with binder matrix supporting small quantity of sample. Instructions included. |
3616W 35 mm Die Sleeve-and-Plunger Set
Used with 3616, 35 mm Evacuable Pellet Die and PrepAid Sample Binder. Forms stable XRF sample discs with binder matrix supporting small quantity of sample. Instructions included. |
3614W 40 mm Die Sleeve-and-Plunger Set
Used with 40 mm Evacuable Pellet Die and PrepAid Sample Binder. Forms stable XRF sample discs with binder supporting small quantity of sample. Instructions included. |
Replacement or spare steel pellets for die operation can be purchased separately. For routine pressing of abrasive materials, SPEX SamplePrep offers 31 mm, 35 mm and 40 mm tungsten carbide pellets which can be substituted for polished steel pellets. (Tungsten carbide pellets are much harder than steel, but more brittle, and are not guaranteed against breakage.) All replacement pellets are sold in pairs.
SPEX SamplePrep Spec-Caps are shallow, thin-walled aluminum cups which are routinely used in the production of pressed-powder sample discs for OES, XRF, and other analytical techniques.
In the finished pellet, briquette, etc, the Spec-Cap forms the bottom and sides. Thus reinforced, sample discs are resistant to chipping and breaking, and are more easily handled, marked, and stored than unclad discs.
3619 30 mm Spec-Cap®
30 mm wide x 8 mm deep, for 3623 die. Produces pellets 31 mm x 5 mm. Outside painted to prevent seizure in die and to facilitate labeling. Sold in units of 100. |
3619A 31 mm Pre-Flared Spec-Cap
31 mm x 8 mm, for 3623 die. The 3619A has been pre-flared for a snug fit in the 3623 31 mm Evacuable Pellet Die, and has an unpainted surface. It may be substituted for the 3619 30 mm Spec-Cap in all applications where flaring is recommended. Eliminates need for 3618 Edge-Flaring Tool. Sold in units of 100. |
3615 33 mm Spec-Cap
33 mm x 8 mm, for 3616 die. Produces pellets 35 mm x 5 mm. Outside painted to prevent seizure in die and to facilitate labeling. Sold in units of 100. |
3617 38 mm Spec-Cap
38 mm wide x 9 mm deep, for 3614 die. Produces pellets 40 mm x 5 mm. Outside is painted to prevent seizure in die and to facilitate labeling. Sold in units of 100. |
3618 Edge-Flaring Tool
For 3617 and 3619 Spec-Caps. This tool widens the Spec-Cap rim to ensure a snug fit against the walls of the die, thus preventing sample loss and pellet jamming. |
3625 Edge-Flaring Tool
For 3615 Spec-Caps. The Edge-Flaring Tool widens the Spec-Cap rim to ensure a snug fit against the walls of the 3616 die, thus preventing sample loss and pellet jamming. |
|
